Author Topic: Msd 6-al question.  (Read 16233 times)

0 Members and 1 Guest are viewing this topic.

wheels

  • Guest
Msd 6-al question.
« on: January 02, 2012, 06:39:51 PM »
Quick question, can u run a 6-al Msd box into an aftermarket non Msd ready to run distributor?

sixpack

  • P Plater
  • **
  • Posts: 22
Msd 6-al question.
« Reply #1 on: January 17, 2012, 01:33:23 AM »
I'd say no.
The ready to run dizzy uses an HEI module incorporated into the dizzy.
The 6AL would be used to replace the HEI module.

The 6AL and the HEI module are both the ECU to amplify the spark to the dizzy.
[IMG=750x206]http://i150.photobucket.com/albums/s103/nqkjw/warwick2.jpg[/IMG]

sms777

  • Rally Licence
  • ****
  • Posts: 740
  • Sponsor & The Mechanic
Msd 6-al question.
« Reply #2 on: January 17, 2012, 08:41:45 AM »
Like sixpack says, you can not run it unless you remove the HEI module first which is not hard to do. The 6AL comes with instructions how to do this, they even supply an adapter wire to suit most electronic dizzies with built in module.

Cheers, Chris.

Phone 02 9793 3332
Biggles, The Flying Mechanic

 

Phone 02 9829 5072

Phone 0438 658 458

Phone 0432 136 333