Tech Talk & Articles > GM Cars

Stud bolts for 1977 Transam Water Pump

(1/1)

1977 Transam:
Hi.

Wondering if anyone knows where I can get 4 stud bolts that are used on the water pump of my 77 Transam.

They are 5/16" with two separate ends.  One side UNC.  One UNF.

I've searched Repco, Scotts Auto, Boltmaster, Rocket, Pontiworld site, Spiller Industrial and a general google search.

Noone has them.

Any help would be great.

Thanks.

LeighP:
You may be able to get the correct kit from Ames Performance in the US (they do mail by USPS).
A lot of people substitute bolts for the studs. Don't forget to use the two dowl tube locators at the bottom of the cover....without them, you risk balancer seal leaks.

recommendation - cover the studs, or bolts, with a liberal coating of anti-sieze compound. I've had to cut a timing cover off a stud where the cover had corroded to the stud.

1977 Transam:
Gday Leigh.

I was curious why they didn't just use bolts.

we've been using the anti-seize thanks.

appreciate the heads up with the dowl tube locators.

I'll check out Ames and see if they can help me. Otherwise bolts it is.

Navigation

[0] Message Index