Tech Talk & Articles > AMCCA Members Tech Talk

mustang down!!!

(1/5) > >>

65pony:
As the topic suggests the  mustang ain't exactly running at the moment and I need a little bit of tech support with it.

I just bought a new electronic distributor for it so went about installing it. Followed the instructions and sure enough she turned over.

So it idle's fine but when I accelerate she just cuts out and shoots fuel straight out the top of the carby.

Now I have turned the mixture screw down and up and played around with the timing on the distributor with no avail. I'm buying a timing light during the week when I get a chance but I just want to make sure everything else i've done is right.

Could this be from something else??

Any help would be great so when it's sunny again I can get back out their :fantastic:

Muzzy 66:
Joel do you have all your leads on the correct way.
How did you go about removing it,did you have it on 1 or just mark the dizzy with something on the block or body and then remove,if you took this route it could be out one tooth on the gear.

65pony:
yeah all the leads are on perfectly. I followed a clip on the net which showed exactly what you just said, marked the 1 position which was on the edge of my oil filter and replace it will the new one.

It just seems weird to me that it can idle but as soon as i give it a bit it'll cut out and blow some fuel.

Muzzy 66:
have you fitted a module or a whole new dizzy?

65pony:
Whole new dizzy. I had the old dizzy with points and that so I updated to a new electronic one.

Navigation

[0] Message Index

[#] Next page