Author Topic: Will this work  (Read 21297 times)

0 Members and 2 Guests are viewing this topic.

bonnevista

  • Top Fuel Pilot
  • *****
  • Posts: 1338
Will this work
« Reply #10 on: May 07, 2010, 10:31:05 AM »
Sorry Dave, I misinterpreted your original post.  I would think a vacuum secondary 4 barrel like your holley could be rejetted on the primaries to run well.  

Even though you don't have a big block, by the way you describe it running rich, it's probably using fuel like one.:lol:

I had a quick look on holley.com and this is the carb they recommend for a stock 289 with manual choke.

   http://www.holley.com/0-81570

It's a 570 cfm vac sec 4 barrel that they say is "street ready, out of the box."

Bumblebee

  • Guest
Will this work
« Reply #11 on: May 07, 2010, 11:24:56 AM »
Dyno tune now! With tri-y's if possible.

bonnevista

  • Top Fuel Pilot
  • *****
  • Posts: 1338
Will this work
« Reply #12 on: May 07, 2010, 01:03:00 PM »
Quote from: Bumblebee link=topic=3185.msg19029#msg19029
Fit a Pontiac engine in it.


And bee (get it, bee) quick about it!!:smile:

:rol::rol::rol::rol::rol:

See what I did, see what I did. :rol::rol:

Bumblebee

  • Guest
Will this work
« Reply #13 on: May 07, 2010, 02:47:42 PM »
I'm with the heroic skipper on this!


 

Phone 02 9829 5072

Phone 0438 658 458

Phone 0432 136 333