Author Topic: Hypereutectic piston (Read 19902 times)

heven67 · « **on:** June 02, 2009, 09:34:13 PM »

Well I could hear a ticking noise and in half an hour turned to a load knock, Well in goes the 289 till I get back to this one, No I cant believe it!;N.......;K...............;J...............

These folk that call themselves engine builders ought to give it away!

I will call them tomorrow, if im not happy I name them bloody cheats!

cpu · « **Reply #1 on:** June 02, 2009, 09:42:55 PM »

Your new motor??????? You got to be p*ssed off

Muzzy 66 · « **Reply #2 on:** June 02, 2009, 10:19:37 PM »

Shes jinxed paul....

Bumblebee · « **Reply #3 on:** June 02, 2009, 11:10:31 PM »

Sorry Hev, that is tragic and infuriating! Can I help in some way?

Cheers Bee

joe74ta · « **Reply #4 on:** June 02, 2009, 11:14:49 PM »

Good luck with that mate. One thing Ive learnt about mechanics is its never there fault

77CVT · « **Reply #5 on:** June 03, 2009, 08:48:57 AM »

That sucks!

One of the reasons I build all my own engines - haven't had a failure, but if I do I can only blame me!

heven67 · « **Reply #6 on:** June 03, 2009, 09:19:09 AM »

Can someont tell me the ticking noise is normal!

cpu · « **Reply #7 on:** June 03, 2009, 11:05:13 AM »

You running solid or hydraulic cam followers?

Sounds like a tappet.

two89w · « **Reply #8 on:** June 03, 2009, 11:27:40 AM »

How is your oil pressure?

Does it do it when its cold or hot or both?

usa383 · « **Reply #9 on:** June 03, 2009, 11:37:51 AM »

sounds like a lifter or rocker noise to me,are you getting plenty of oil up the top.

Author Topic: Hypereutectic piston (Read 19902 times)

cpu

Bumblebee

cpu

two89w

usa383